When the pressure type sand blasting device blasts the entire surface of small workpieces, most of the workpieces are put into the barrel and mixed together to perform sand blasting, which can achieve good results.
Sandblasting is different from friction processing such as abrasive cloth and vermiculite. The processed abrasive particles are processed in direct flight against the surface of the object. When the surface of the processed object is relatively high, as long as the particles can fly, the processing can be performed
Some uses of dry blasting machine, 1, change the physical and mechanical properties of the workpiece to improve or reduce the surface roughness; change the surface tensile stress to compressive stress; improve the surface lubrication state; reduce the movement noise of the parts.
The static of the sand blasting machine is actually not dangerous, but it is only caused by dry weather. The majority of users should not be nervous when encountering such problems. As long as they are prepared in the early stage, the static electricity will be far away from you
Dongguan Meijun sandblasting equipment-professional sandblasting equipment manufacturer, dust-free environmental protection sandblasting machine, water sandblasting machine, high pressure water sandblasting machine, high pressure water cleaning sandblasting machine, automatic high pressure water cleaning equipment
The pressure sand blasting machine is used for the impact and cutting effect of the abrasive on the surface of the workpiece, so that the appearance of the workpiece has a certain degree of cleanliness and different roughness, which improves the mechanical properties of the surface of the workpiece, thereby improving the fatigue resistance of the workpiece. Increased adhesion between it and the coating
The advantages of pressure blasting blasting technology: The environmental protection pressure blasting machine has a new improvement in the previous cyclone separation. The general separation effect of the previous blasting machine is about 80%. The separation effect of environmentally friendly sand blasting machines is nearly 99%.
What are the characteristics of Dongguan sand blasting machine? Simple operation: ordinary workers can operate the machine skillfully after half an hour of training, and there is an advanced automatic control system to prevent workers from misoperation.
Troubleshooting method of automatic sand blasting machine-Inspection: 1. Check if the dust bag is blocked; 2. Whether the dust bag is aging or blocked; 3. Whether the abrasive contains too much dust; 4. Whether the recovery pipe is blocked ; 5, whether the gas nozzle hole is too large and the compressed air pressure is too high ...
Mobile sand blasting machine operation flow, 1. Operation process before using the sand blasting equipment, connect the air source and power supply to the sand blasting machine, and turn on the power switch on the electrical box.
Selection of blasting effect: Generally speaking, the blasting effect is mainly determined by the blasting medium (abrasive). The range can be recognized from strong metal abrasives to soft resin abrasives. Dry spray and wet spray are also important considerations. Factors that customers can determine with the sample of the workpiece.
The sand blasting machine is introduced. The sand blasting machine realizes automatic blasting through the electrical control system. It can automatically adjust the blasting angle, blasting time, blasting distance, back blowing time, spray gun movement, and table speed.