Meijun sandblasting products are finely made, beautiful and applicable, and value for money. We give you the most complete range of sandblasting gun
products, allowing you to enjoy the ease and joy of a one-stop service, save your precious time, and get a relaxed and happy working state! Dongguan Humen Meijun Sandblasting Equipment Co., Ltd. specializes in the production and sales of sandblasting machinery supporting products, accessories and consumables. Meijun has accumulated long-term practical experience, constantly strives to innovate, open procurement channels, and has been reducing the use of sandblasting. Manufacturers of machine parts work hard at the cost.
1. Type A sand blasting gun: Also known as ribbed spray gun, it is divided into rib type and direct insertion type. The advantage of direct insertion is that the sand pipe is directly connected to the spray gun to increase the amount of sand. A type spray gun is commonly known as large size with ears Spray gun, the height from the core insert of the gun body to the rib mouth at the bottom of the gun is 90mm, the thickness of the gun body is 36mm, the outer diameter of the core is 18mm, the length is 116mm, the outer diameter of the rubber part of the core is thinner, the inner diameter is 4mm, and the inner diameter can be used 6-10mm nozzle. There are two materials: A1 type A2 aluminum alloy blast gun and A4 type A5 polyurethane blast gun.
2. Type B sand blasting gun
: Inner rib spray guns are divided into ribbed and in-line type. The advantage of in-line type is that the sand pipe is directly connected to the spray gun to increase the amount of sand. From the gas core insert of the gun body to the gun body The height of the ribbed bottom is 90mm, and the thickness of the gun body is about 40mm.
3. Type C sand blasting gun: The surface is polished, such as stainless steel, lightweight and easy to use. It is commonly known as the small blasting gun. It has C1, C2, and C3 models. Because of its small size, it is the first choice for manual blasting machines. The fixed gun rack can be used as an automatic blasting machine for sand blasting. Most Taiwan-funded sand blasting machinery equipment factories choose C-type guns as the supporting blasting guns for automatic blasting machines. The rib length of the nozzle sleeve from the core inlet to the bottom of the gun body is 7CM, and the thickness of the gun body is about 4CM.
4.C-type blasting gun: The air core is thinner and the sand material circulation space inside the gun body is large. The C-type blasting gun suitable for spraying large-grain sand is similar in appearance to the A-type blasting gun, but the length is different and the overall size is small. A lot. Some manufacturers also call the C-type sandblasting gun with a gun holder retaining ring (ear on the gun body) as a K-type sandblasting gun.
Related Searches: Sandblasting Gun Sandblasting Pipe Accessories