刘伯温精选一码大公开

Welcome to Dongguan Meijun Sandblasting Equipment Store!
Meijun Sandblasting Equipment
Meijun Sandblasting Equipment
Focused on sand blasting machine and accessories for more than ten years
Pay attention to materials, high quality materials, long life
contact details
Meijun Sandblasting Equipment
Product Categories
4News Center

The number of blast guns is customized according to the original design of the blast machine


The number of blast guns is customized according to the original design of the blast machine

1. Selection of sand material. Generally, sand with good quality is selected, and brown corundum, white corundum, green silicon carbide, glass beads, resin sand, steel sand, and steel shot are usually used. The specific sand used should be selected according to the actual process requirements.

2. There are wear holes in the sand nozzle, gas nozzle and gun body. It should be replaced in time to avoid causing greater wear. When the caliber of the nozzle is increased to 30%, it should be replaced in time. So as not to waste gas.

3. The hardness and shape of each sand are different. Generally speaking, the larger the hardness, the more abrasive the sandstone will be, the faster the damage to the spray gun, so when you encounter similar sand, you should check the caliber of the spray gun and nozzle, and check it every 7 days. Generally, the hardness is called small sand. The shape of the sand is round. The inspection cycle can be checked every 15 days.

4. The boron carbide nozzle is introduced to replace which part is worn when the blast gun is replaced. Do not replace the whole set, so as to avoid wasting costs. The number of spray guns of the sand blasting machine is customized according to the original design of the sand blasting machine . It consists of nozzles, sand nozzles, gas nozzles, gun bodies, and plastic sleeves. The nozzle ultimately determines the efficiency of the sand blast and the air consumption of the air compressor. The greater the number of guns, the faster the processing efficiency, and conversely, the higher the air source using an air compressor. The nozzle of a general-purpose sandblasting machine has a gas consumption of 0.8 cubic meters per minute at 8mm.




Related Searches: Boron Carbide Nozzle , Sandblasting Machine , Sandblasting Helmet , Chongqing Please visit: http://edghakxa.com



刘伯温精选一码大公开 - About Us - Products - Success Stories - Cooperating Clients - Equipment Video - Company Environment - News Center - Industry News - Message - Recruitment - Contact Us
LOGO
Dongguan Humen Meijun Sandblasting Equipment Store Copyright © Copyright 2017 Technical Support: Dongguan Website Construction [ GMAP ]
Address: Building 1-1, Building A, Qihe Industrial Park, No. 33 Xinxing Road, Xinlian Community, Humen Town, Dongguan City. Tel: 0769-82261696 / Mr. Zhong Visits:
* The relevant webpage materials and related resources on this site are from the Internet. If there is any infringement, please inform us quickly. We will delete it within 24 hours. [ Background Management ]
Main: sand blasting machine, water blasting machine, derusting blasting machine, boron carbide nozzle, blasting machine accessories, blasting gun, mobile phone shell blasting machine, aluminum plate blasting machine, Dongguan blasting machine accessories, environmental protection spraying Sand room, Dongguan sand blasting machine, environmental protection sand blasting room [ Baidu Statistics ]
【粤 ICP 备 09153882 号 -1】 【粤 ICP 备 09153882 号 -2】