The circulating honeycomb type sand blasting room adopts the honeycomb sand absorbing floor technology, and the sand is conveyed by wind. It does not need the auger, bucket elevator and other machinery commonly used in traditional mechanical blasting rooms. While improving the work efficiency, it also significantly reduces the machinery Repairs and improved working conditions. The main features and advantages of the wind cycle honeycomb sandblasting room are described below.
First, the equipment failure rate is low, and maintenance work is significantly reduced.
Because the sand blasting room is equipped with a honeycomb type sand absorbing floor with a grid plate, and no traditional machinery such as auger, belt conveyor, bucket elevator, etc., it avoids various types of mechanical wear during the sand collection process. Equipment maintenance is mainly based on the regular replacement of steel plates at the elbow of the duct according to the wear condition, the equipment failure rate is low, and the maintenance workload is small.
Second, reduce infrastructure costs
Due to the elimination of bucket elevators and other equipment, there is no need to dig deep pits, and the depth of the foundation is generally about 500mm, which saves a lot of infrastructure costs.
Third, save a lot of fixed asset investment
The wind cycle honeycomb type sand blasting room does not need auxiliary equipment such as sand pusher and sand suction machine, which saves a lot of asset investment.
Fourth, completely improve the working environment
The wind cycle honeycomb type sand blasting room relies on the fan to provide power, and the sand and air of the entire room are sucked into the air duct through the sand suction floor and enter the sand and dust separator, and the upper air inlet and floor suction are formed inside the room The top-down circulating airflow keeps the sand and dust on the bottom of the room. The dust content in the air in the honeycomb sandblasting room with wind circulation is very low, the visibility is high, the working environment is completely improved, and the workers' health is effectively protected.
Five, high work efficiency
During the blasting operation, the sand material is automatically recovered, which saves a lot of sand cleaning time on site and shortens the operation time of a single section.
The wind cycle honeycomb type blasting room is obviously superior to the traditional blasting room in terms of input cost, degree of automation or equipment maintenance, degree of environmental protection at work, and labor intensity.
I will share with you more about sandblasting.
The meaning of sand blasting is to describe the mechanical equipment that promotes the cleaning and rust removal or etching of the surface in fine materials.
Sand blasting equipment consists of three most basic different parts: the abrasive itself, the air compressor, and the nozzle. For etching and cleaning small objects, sometimes a piece of glass is also needed because some dust-like matte glass is used in the market in very large quantities. Sichuan Honeycomb Sandblasting Room
The blasting effect is mainly determined by the material of the part and the blasting abrasive. Depending on the material of the part, the abrasive blasting abrasives can range from strong metal abrasives to soft resin abrasives. Dry blasting and liquid blasting are also important considerations.
The scope of application is as follows:
This machine can complete the clear dies, forgings, welding parts, heat treatment parts, stamping parts and machined parts; rough surfaces, descaling, residual salts and burrs, and pretreatment processes before spraying and plating. Finishing treatment; this machine is also used for spraying glass shots, plastic sand, and strengthening the surface of finishing parts; this machine is suitable for single and mass production of small and medium parts.
The performance characteristics are as follows:
Novel design, simple and convenient operation; good processing efficiency and low energy consumption; automatic sand return, cyclone separator can separate dust and sand, reduce abrasive consumption; main parts are made of high quality imported parts, with long service life;
As a cleaning method, sandblasting is often used to remove paint or sealant application surfaces. When painting, an unwanted trap of dust, dirt, or a new layer of foam under the paint, or other imperfections. The high-speed abrasive particles sprayed out by the sand blaster make all the defects clean and loose, which can then be easily washed off, creating an incredibly smooth surface to lay a new layer of paint. Sand blasting can also be used for cleaning projects such as the shells of ships or large structures of the Golden Gate Bridge.