Dongguan Meijun Sandblasting Equipment Production Wholesale Sandblasting Machine Parts , Boron Carbide Nozzle , Sandblasting Gun , Sandblasting Tube , CLEMCO Air Control Sand Control Valve , Sandblasting Helmet , Sandblasting Suit , Air Control Sand Control Valve , Brown Corundum , Pressure Sand blasting machine , ceramic beads and other products, telephone 0769-82261696 13215392671 We will do our best to serve you!
1. Small-sized wind-driven or electric rust-removing blasting pipes
are mainly powered by electricity or compressed air. They are equipped with appropriate rust-removing devices and carry out reciprocating or rotary motions to meet the requirements of rust-removal in various occasions. Such as angle grinders, wire brushes, air-driven pin beam rust removers, wind-driven rust hammers, and tooth-shaped rotary rust removers, etc., are semi-mechanized equipment, with lightweight tools and high mobility, which can remove rust more thoroughly. , Old coating, etc., can coat the coating, the efficiency is greatly improved than manual rust removal, up to 1 ~ 2m2 / h, but can not remove the oxide scale, the surface roughness is small, can not achieve high-quality surface treatment quality , The work efficiency is lower than the spray treatment. Can be used anywhere. 2. Shot blasting and rust removal
<BR> It is mainly composed of particle spray erosion to achieve surface cleanliness and appropriate roughness. The equipment includes open-type blasting rust remover, closed blasting, vacuum blasting, and open-type. The shot blasting (sand) machine is widely used, which can completely remove all impurities on the metal surface, such as scale, rust and old paint film, with high rust removal efficiency of 4 ~ 5m2 / h, high mechanical degree and good rust removal quality. 3. High-pressure water abrasive rust removal
<BR> Using the impact of high-pressure water jet and water pry action to destroy the rust and the adhesion of the coating to the steel plate, the sand blasting pipe is
characterized by no dust pollution and no damage to the steel plate, which greatly improves the rust removal efficiency. It can reach more than 15m2 / h, and the rust removal quality is good, but the steel plate after rust removal is easy to return to rust. It must be coated with a special wet rust removal coating, which has a greater impact on the coating of general performance coatings. 4. Shot blasting and blasting pipe
rust removal is to use high-speed rotating impellers to throw abrasives to the surface of iron and steel to achieve the purpose of rust removal. It is a more advanced mechanical treatment method for rust removal of hull steel, not only production efficiency High cost, low cost, high degree of automation, can achieve pipeline operation, less environmental pollution, but only indoor operation. Click: http://edghakxa.com/ for more information.