40-tube inner wall sandblasting gun
Also known as MJ35-100MM small pipe sandblasting gun on the inner wall:
为 散沙头设计,内部组件为钨钢或碳化硼或两者搭配组合体,充分利用钨 The 40-tube inner wall sand blasting gun is designed for loose sand , and the internal components are tungsten steel or boron carbide or a combination of the two , making full use of tungsten
针对不同部件功能使用不同材料,完美降低钢砂,钢丸等大颗 The toughness and compression characteristics of steel and the high wear resistance of boron carbide , using different materials for different component functions , perfectly reducing the large particles such as steel grit , steel shot, etc.
以延长内壁喷砂枪的使用寿命. The rapid damage caused by the strong impact of the abrasive on the inner wall device to extend the life of the inner wall blasting gun .
可以处理内径33MM-200MM管道内壁喷砂(需加大散沙头). MJ35-100MM can handle sand blasting on the inner wall of 33MM-200MM inner diameter pipe ( need to increase the loose sand head ).
喷砂后对内壁表面清理均匀度高,达到SA2.5-3.0级别. The angle of the loose sand head is scientific.After the sand blasting, the uniformity of the inner wall surface is high , reaching SA2.5-3.0 level .
砂管接头)为M27*1.5或2.0牙距接口(牙距可以根据客户要求制作). The spray gun connection ( sand pipe joint ) is M27 * 1.5 or 2.0 pitch interface ( the pitch can be made according to customer requirements ).
以满足喷砂口径的深度需求,通常加长钢管设计为 The inner teeth of the spray gun are designed to allow the addition of steel pipes of different lengths to meet the depth requirements of the blasting caliber.Usually , the lengthened steel pipe is designed as
一头接内壁喷砂枪,另一头接砂管连接头,砂管接头可以连接外径28MM或32MM砂管,也可以通 Two external teeth , one connected to the inner wall sandblasting gun , and the other connected to the sand tube connector.The sand tube connector can be connected to a 28MM or 32MM outer diameter sand tube , or
的大砂管. The large sand tube with an outer diameter of 40 / 48MM is connected through the conversion joint .
● 33MM-100MM 的管道内壁喷砂 , 因为不使用枪架 ,所以 不能保证喷枪本身在管道中心点 , 因此随货配有 2 个 O 型圆环 , For the blasting of the inner wall of the 33MM-100MM pipe , because the gun rack is not used , the spray gun itself cannot be guaranteed at the center of the pipe , so 2 O -rings are provided with the goods .
3 个螺杆孔 , 用于安装不同长度的螺杆 . 使用时根据管道大小旋转相应螺杆安装 , 尽量保证喷枪散沙头在管道的中 There are 3 screw holes on the side of the ring for installing screws of different lengths . When using, rotate the corresponding screw according to the size of the pipe to install , try to ensure that the spray gun sand head is in the middle of the pipe.
( 如有随货所配螺杆 不能满足现场要求的 , 请使用者自行配置相应大小的螺杆 ) Heart point position ( if the screw provided with the goods cannot meet the site requirements , please configure the screw of the corresponding size )
● 作业，也可与自动输送装置配合使用 , 可实现自动化作业 . The sand blaster can manually and uniformly pull sand blasting operations, and can also be used in conjunction with an automatic conveying device to achieve automatic operations .
: For example :
1) , 实现匀速后退动作 ; Use a uniform speed motor to pull back the sand blasting tube at a uniform speed to achieve a uniform speed back movement ;
2) , 实现喷砂器沿轨道匀速自动后退 Install a fixed rail to extend into the pipeline to realize the sandblaster to automatically retreat at a uniform speed along the rail
: Company name : 东莞市虎门美俊耐磨喷砂器材店 Magin Dongguan Humen Meijun Wear-resistant Sandblasting Equipment Store
: 东莞市虎门龙眼工业区龙眼 6 路 53 号 Address : No. 53 Longan 6 Road , Longyan Industrial Zone, Humen, Dongguan
:0769-82261696 Phone : 0769-82261696 13215392671 Phone: 13215392671 13238321213 http://edghakxa.com
email@example.com QQ: 491440166