刘伯温精选一码大公开

Welcome to Dongguan Meijun Sandblasting Equipment Store!
Meijun Sandblasting Equipment
Meijun Sandblasting Equipment
Focused on sand blasting machine and accessories for more than ten years
Pay attention to materials, high quality materials, long life
contact details
Meijun Sandblasting Equipment
Product Categories
4Products
压力式喷砂机配件

Pressure sand blasting machine accessories

Details

Pressure sand blasting machine accessories

Development type sand blasting machine accessories, high pressure connection air pipe, cylinder safety valve, quick joint, sand control valve, intake valve, exhaust valve, oil-water separator, sand blasting gun, sand blasting pipe

Our company specializes in the production and sale of sandblasting machine accessories:
Air shut-off valve (intake valve) Automatic exhaust valve High-pressure connection air pipe Oil-water separator sand cylinder safety valve Air-controlled sand control valve and its components Manual sand control valve and its components
Sand tee, air pipe, 4-way manual control switch, mushroom head sand pipe, closed rubber ring, sand pipe, quick joint, sand cylinder, quick joint, sand gun, quick joint, etc.
Pneumatic control system of pressure type mobile sand blasting machine
Pneumatic control system: including automatic exhaust valve, air control switch, rubber core I-shaped seat, air control sand control valve, thickening sand tee, air shutoff valve and other accessories;
Our sales related accessories are:
US M brand air control sand control valve:
Rubber core I-shaped seat -play a role in controlling the amount of sand produced, smooth sand production, sensitive control, need to replace the wear parts for the rubber core, this rubber core is made of wear-resistant rubber, durable.
Air control sand control valve -used with rubber core I-shaped seat, the main replacement parts are film and valve spring, easy to disassemble, made of wear-resistant rubber, durable and cheap;
Automatic exhaust valve -automatic control type, sensitive exhaust, easy to use, high safety performance, need to replace the consumable part is a film, this film is made of wear-resistant rubber, durable.
Air shut-off valve -also known as three-way air control valve, it is used to switch on and off the main origin of the sand blasting machine. It also distributes air to the bottom sand control valve and the top automatic exhaust valve. The main replacement part is the film. Made of wear-resistant rubber for sensitive control;
Manual butterfly sand control valve: At present, large sand blasting projects use 50-80 meters long sand blasting pipes or sand blasting with smaller particles of sand, or the rubber core of the sand control valve hardens due to long-term non-use, which often occurs. In the case of sand pipe plugging, the manually controlled butterfly sand regulating valve is used to reduce the sand's sand plugging problem caused by the resistance caused by the vertical sand falling of the ordinary sand valve due to the 45-degree inclined sand output. Butterfly sand control valve is a sand control valve commonly used in large-scale engineering sand blasting machines abroad. Thomson sand control valve has the same effect. Welcome to consult!
Other air control accessories (accessories for old imported sand blasting machines):
American CLEMCO type air control sand control valve copper inlet valve, copper exhaust valve, exhaust water filter,
The new aluminum alloy air shut-off valve has a reasonable structure, strong aerodynamics, and low loss materials.
Compared with the old three-way air shut-off valve, it has the characteristics of sensitive loading and unloading, light weight, easy installation, and no rust.The key is to use an rubber ring instead of a rubber gasket, which reduces the chance of wear and increases life.
The new aluminum alloy air shut-off valve is the first choice for pressure blasting machine, mobile blasting machine, and open type blasting machine to control the main air source switch.
It can be used in combination with air-operated switches (air-operated), foot switches, and solenoid valves (electrically-operated) to fully meet customers' individual assembly needs.
Sandblasting protective equipment:

Sandblasting suit, sandblasting helmet, sandblasting head cover, particle gloves, hand cloth cover, dust bag, filter element
1. Canvas sandblasting protective clothing: Style A- Upper body with hood Style B- Upper body independent + hood Style C- Full body conjoined + hood (helmet)
■ Appearance is made of cotton thick canvas, which is durable and has good sealing performance to prevent sand particles from entering the body.
■ Eye mask adopts toughened glass, double-layer protection, easy to disassemble, can be unscrewed and replaced without changing the window glass, which can effectively protect the eyes and face from splashing objects. ■ Suitable for: sand field, metal sandblasting
2.Simple sandblasting and spray painting head cover: canvas material, with shawl, head cover with trachea, can be used for wind, wide field of vision, double-layer plexiglass, easy to disassemble, can be unscrewed and replaced directly without removing
■ Appearance is made of cotton thick canvas to prevent sand particles from entering the body, lined with safety helmet. ■ Eye mask is made of tempered glass, double-layer protection, which effectively protects eyes and face from splashing. ■ Suitable for: sand field, metal sandblast And other workplaces
3.Imported sandblasting helmet:
The structure is reasonable, the field of vision is wide, and the double-layer PE window film is adopted for easy disassembly and the cost of window film replacement is low.
Compared with similar helmet products on the market, especially helmets of imported brands, our helmets are economical, lightweight and comfortable to wear. They are sandblasted helmets.
The helmet shell is made of glass fiber reinforced plastic, which has good sealing and protection performance;
The inner layer of the helmet is a brand safety helmet or a sponge compartment (which can effectively reduce part of the noise). After entering the helmet, the gas flows out through the compartment to avoid blowing the head directly and causing discomfort;
There is a sponge ring on the neck to isolate the outside, a thick wear-resistant cloth shawl to the waist (similar to a short-sleeved vest), and arms can be worn with extended grain sandblasting gloves to protect the arm;
The back of the helmet is equipped with a 60CM air supply pipe, and the pipe end is equipped with a quick connector. The copper connectors of various specifications can be exchanged according to the actual air supply pipe size to connect the air supply pipe.
After installing the air filter, it can filter bad smell, water, oil vapor, rust and other dust particles.
The air temperature regulator uses the filtered compressed air as the energy source. After adjusting the handle, you can get a comfortable and comfortable breathing air. When the compressed air pressure is 0.4-0.7MPa, the adjustment temperature range is 10 ℃ -40 ℃.

4 Sandblasting clothing temperature controller : temperature-adjustable sandblasting clothing
The air temperature regulator uses the filtered compressed air as the energy source. After adjusting the handle, you can get a comfortable and comfortable breathing air. When the compressed air pressure is 0.4-0.7MPa, the adjustment temperature range is 10 ℃ -40 ℃.
5. Activated carbon air filter
Activated carbon is a highly efficient adsorption material with a developed microporous structure, large adsorption capacity, fast adsorption and desorption speed, heat resistance, acid and alkali resistance
Activated carbon gas filter is a filter that can remove dust, acid and alkali substances and harmful odor substances at the same time, making the air clean and fresh.
The filter material is bag-type activated carbon, which can be replaced.
Function: Permanent removal of gaseous pollutants. Gaseous pollutants are removed by chemical reactions that are adsorbed and irreversible.
Uses: It is used to purify the human breathing air in a sand blasting room or an open blasting process. The effect is particularly ideal and easy to use.
Purification of target gases: hydrocarbons, carbon dioxide, formaldehyde, volatile sulfur oxides, carbon monoxide, hydrogen sulfide, ammonia, benzene, organic acids, organic compounds.
6.Thickened sandblasting protective particle gloves: 60MM long, wear-resistant, good protection performance, lightweight feel;
7.Hand cloth cover: Canvas material, the diameter of the ferrule is 18MM. The length is 28MM. It is used in the sand blasting case, which is convenient for small objects to enter and exit the work space.
7.Dust collection bag: also known as dust bag, filter cloth material, used for dust collection of sand blasting machine, specifications can be customized.
8.Pulse type sand blasting machine dust removal filter element : Special process production, PS, PSU polymer microporous sintered membrane filter material, has the advantages of smooth surface, good air permeability, low running resistance, high filtration accuracy, and can be used repeatedly. Relative to 1 micron dust filtration accuracy can reach 99.9%, widely used in engineering machinery (drill), electronics, chemical, tobacco, building materials, metallurgy and other industries for dust removal, ultra-fine powder recovery and air purification. It solves the problem of filtering coalescence, humidity and fibrous dust, complete specifications, quality assurance, easy cleaning, and can be removed with a shake.
Filter materials include imported and domestic filter paper, oil-proof, waterproof, anti-static, and laminated polyester fiber.
Suitable for pulse dedusting of sand blasting machines.
The outer diameter of the barrel is 330MM * the inner diameter is 220MM × the height is 600 / 660MM; one end is open and the other is closed (the middle round hole is 16MM). The filtering area is 7.5 square
9.Temperature blasting cap:
The structure is reasonable, the field of vision is wide, and the double-layer PE window film is adopted for easy disassembly and the cost of window film replacement is low.
Compared with similar helmet products on the market, especially helmets of imported brands, our helmets are economical, lightweight and comfortable to wear. They are sandblasted helmets.
The helmet shell is made of glass fiber reinforced plastic, which has good sealing and protection performance;
The inner layer of the helmet is a brand safety helmet or a sponge compartment (which can effectively reduce part of the noise). After entering the helmet, the gas flows out through the compartment to avoid blowing the head directly and causing discomfort;
There is a sponge ring on the neck to isolate the outside, a thick wear-resistant cloth shawl to the waist (similar to a short-sleeved vest), and arms can be worn with extended grain sandblasting gloves to protect the arm;
The back of the helmet is equipped with a 60CM air supply pipe, and the pipe end is equipped with a quick connector. The copper connectors of various specifications can be exchanged according to the actual air supply pipe size to connect the air supply pipe.
After installing the air filter, it can filter bad smell, water, oil vapor, rust and other dust particles.
The air temperature regulator uses the filtered compressed air as the energy source. After adjusting the handle, you can get a comfortable and comfortable breathing air. When the compressed air pressure is 0.4-0.7MPa, the adjustment temperature range is 10 ℃ -40 ℃.

Sand tube quick joint
Sand pipe quick joint: domestic 1 inch 2 sand blast pipe standard joint (sand pipe quick joint, dragon catch), the market is universal. There are two types of nylon and cast iron, which are suitable for sandblasting pipes with an outer diameter of 48-53MM.
Sandblasting gun joints: There are two types of nylon and cast steel, which can be applied to most of the dual-inlet sandblasting guns and single-injecting sandblasting guns on the market. There are two types of coarse and fine threads, standard inch threads 1-1, 4, 11-1, 2 NPSM (1 inch 2 pipe threads), coarse thread 2, 4-1, 2 UNC (international universal rib)
Heavy-duty high-pressure sandblasting pipe, sand suction pipe, buried suction pipe, organ pipe
Sand blasting tube (export standard cloth surface braided steel wire wound tube) inner diameter 10mm, 13mm, 19MM, 25mm, 32mm, 38mm, 100MM (sand suction tube)
Small wear-resistant tube for siphon sand blasting machine: inner diameter 13MM, outer diameter 23-25MM, cord winding, wear-resistant and pressure-resistant.
Especially recommended for high pressure blasting pipes:
1) Winding type: 32mm inner diameter wear-resistant rubber layer 7-10MM thick, cord winding (2 layers), outer diameter 51, 53MM, 20 meters per roll (40 meters can be customized).
2) Weaving type: inner diameter 32MM, wear-resistant rubber layer 7mm thick, cloth weaving (5 layers), outer diameter 48MM, each roll 20 meters (40 meters can be customized).
3) Winding type: 19mm inner diameter cord winding (2 layers), outer diameter 29, 33MM, 20 meters per roll (40 meters can be customized).
Inner diameter 25MM cord winding (2 layers), outer diameter 40MM, 20 meters per roll
4) Winding type: inner diameter 13MM cord winding (1 layer), outer diameter 24, 26MM, 50 meters per roll
Winding type: inner diameter 13MM cord winding (2 layers), cloth clamp (3 layers) outer diameter 28MM, each roll 20 meters
Remarks: It is especially suitable for the use of automatic sandblasting machines.The inner cords are resistant to compression and pulling, and the outer cloth surface is resistant to abrasion. Compared with the commonly used smooth sandblasting tubes in the market, they are more resistant to the swing of the automatic sandblasting machine gun frame. Pulling wear is 3-4 times the life of smooth sand pipe.
5) Steel ring sand suction tube: 100mm inner diameter black wear-resistant rubber built-in steel ring for sand suction and return to sand 4 meters / root 6 meters / root 8 meters / root
Durable hoses; strong and abrasion resistant, for sand and steel spray equipment,
Brazed-dimensional wound sandblasting pipe has the characteristics of high abrasion resistance, high toughness, high pressure resistance, etc., using high-quality rubber cloth as the reinforcement layer, good flexibility and strong pressure capacity;
Venturi nozzle, single inlet nozzle: (Venturi nozzle, English Venturi Nozzle)
The structure of the venturi nozzle is divided into three parts, the contraction section, the straight section and the diffusion section, which is difficult to make. Venturi nozzles have better aerodynamic performance than straight-hole nozzles. The vortex phenomenon is significantly improved or no longer exists, and the pressure loss is greatly reduced. Under the same pressure conditions, the abrasive outlet speed can be more than doubled. The working efficiency is higher than that of straight-hole nozzles. Increase 15% -40%, reduce abrasive consumption by 20%. Venturi nozzles are generally long, and the venturi nozzles are designed to expand gradually so that the abrasive has a high initial velocity and sprays uniformly on the surface of the workpiece. This Venturi nozzle with an inlet of 1-1 / 2 inches is widely used for sandblasting of difficult-to-machine surfaces.
General conventional model comparison table:
Flare entrance diameter is 32MM and 25MM
Nozzle sleeve thread specifications: standard inch thread 1-1 / 4, 11-1 / 2 NPSM coarse thread 2, 4-1 / 2 UNC
Inner diameter (ID) Outer diameter (OD) Length
1/4 inch (6.4mm) 1-5 / 8 inch (41.5mm) 125mm
5/16 inch (7.9mm) 1-5 / 8 inch (41.5mm) 135mm
3/8 inch (9.5mm) 1-5 / 8 inch (41.5mm) 165mm
7/17 inch (11.1mm) 1-5 / 8 inch (41.5mm) 195mm
1/2 inch (12.7mm) 1-5 / 8 inch (41.5mm) 220mm
Double inlet nozzle (double venturi nozzle):
It consists of two front and rear nozzles. Due to the effect of high-speed airflow, a large negative pressure is generated. The surrounding air is sucked into the nozzle, so that the amount of air ejected is greater than the amount of air sucked. The blasting area of the double-blast air blasting gun is 35% larger than the standard single-blast blasting area, and the outlet speed of the blasting medium is reduced. This type of nozzle is usually used for large-area medium-strength surface treatment.
General conventional model comparison table:
Flare entrance diameter is 32MM and 25MM
Nozzle sleeve thread specifications: standard inch thread 1-1 / 4, 11-1 / 2 NPSM coarse thread 2, 4-1 / 2 UNC
Inner diameter (ID) Outer diameter (OD) Length
1/4 inch (6.4mm) 1-5 / 8 inch (41.5mm) 130mm
5/16 inch (7.9mm) 1-5 / 8 inch (41.5mm) 140mm
3/8 inch (9.5mm) 1-5 / 8 inch (41.5mm) 170mm
7/17 inch (11.1mm) 1-5 / 8 inch (41.5mm) 200mm
1/2 inch (12.7mm) 1-5 / 8 inch (41.5mm) 225mm
Ding Ding style high pressure sand blasting gun:
The shell is made of plastic, which has a good feel and an obvious anti-collision effect. The nozzle is generally made of tungsten steel, and the inner hole is designed with an elongated straight hole, which makes the sand blasting more concentrated and the blasting distance is longer.
■ Angle nozzle:
The direction of movement of the abrasive flow has changed, and it can be used to clean steel structures such as bridges, iron towers, fascias, and inner surfaces of pipes, so that these difficult-to-clean parts can be directly hit by the abrasive to achieve the purpose of cleaning. The angle nozzle has one, two, three holes, etc. The angle between the centerline of the hole and the axis of the nozzle is 45 degrees, 90 degrees, and 135 degrees, which can meet the needs of different construction occasions, cleaning workpieces of different shapes.
Nozzle sleeve thread specifications: standard inch thread 1-1 / 4, 11-1 / 2 NPSM coarse thread 2, 4-1 / 2 UNC
Inner diameter (ID) Outer diameter (OD) Length
1, 4 inches (6.4mm) 1-5, 8 inches (41.5mm) 80mm
5, 16 inches (7.9mm) 1-5, 8 inches (41.5mm) 80mm
3, 8 inches (9.5mm) 1-5, 8 inches (41.5mm) 80mm
Company Name: Dongguan Humen Meijun Sandblasting Equipment Store
Address: No. 33 Xinxing Road, Xinlian Community, Humen Town, Dongguan City, Guangdong Province
Phone: 0769-82261696 Contact phone: 13215392671 13238321213 http://edghakxa.com
QQ:491440166 elsonzhong@163.com QQ: 491440166
刘伯温精选一码大公开 - About Us - Products - Success Stories - Cooperating Clients - Equipment Video - Company Environment - News Center - Industry News - Message - Recruitment - Contact Us
LOGO
Dongguan Humen Meijun Sandblasting Equipment Store Copyright © Copyright 2017 Technical Support: Dongguan Website Construction [ GMAP ]
Address: Building 1-1, Building A, Qihe Industrial Park, No. 33 Xinxing Road, Xinlian Community, Humen Town, Dongguan City. Tel: 0769-82261696 / Mr. Zhong Visits:
* The relevant webpage materials and related resources on this site are from the Internet. If there is any infringement, please inform us quickly. We will delete it within 24 hours. [ Background Management ]
Main: sand blasting machine, water blasting machine, derusting blasting machine, boron carbide nozzle, blasting machine accessories, blasting gun, mobile phone shell blasting machine, aluminum plate blasting machine, Dongguan blasting machine accessories, environmental protection spray Sand room, Dongguan sand blasting machine, environmental protection sand blasting room [ Baidu Statistics ]
【粤 ICP 备 09153882 号 -1】 【粤 ICP 备 09153882 号 -2】