Dongguan Meijun Automation Equipment Co., Ltd.
Glass flake liquid automatic water blasting machine
手机显示器镜片喷砂机，玻璃镜片喷砂机，后视镜玻璃镜片喷砂机，各种触摸显示屏镜片喷砂机，手机显示屏玻璃镜片，手机后盖陶瓷/玻璃专用通过式自动液体喷砂流水线， MAGIN760-36A automatic liquid blasting line - Mobile phone display lens sand blasting machine, glass lens blasting machine, rear view mirror glass lens blasting machine, various touch display lens blasting machine, mobile phone display glass lens, mobile phone Rear cover ceramic / glass special pass-through automatic liquid blasting line,
The high-end liquid automatic water blasting machine produced by Dongguan Meijun Automation Equipment Co., Ltd. has been used in top mobile phone component manufacturers for the production of the latest international mainstream high-end mobile phone glass lenses, ceramic cases, and glass cases.
适用于显示屏玻璃喷砂，手机后盖陶瓷/玻璃喷砂，汽车后视镜玻璃喷砂工艺。 MAGIN760-36A line automatic liquid blasting line - suitable for display glass blasting, mobile phone back cover ceramic / glass blasting, automotive rearview mirror glass blasting process.
This device has a number of fine features:
1) Super fine powder abrasive smooth blasting function;
2) Fine powder uniform atomization and water fusion function;
3) Integrate the material and trough with the uniform fusion of abrasive liquid;
4) Quickly start the anti-sediment function to ensure the equipment's extended service life;
5) Sand blasting uniform, mirror surface even after spraying, same color;
次清洗-喷砂-2次清洗-喷砂-3次清洗-喷砂-4次清洗-烘干-下件。 The working process of this machine is the upper part of the module, sandblasting -1 time cleaning - sandblasting -2 times cleaning - sandblasting -3 times cleaning - sandblasting -4 times cleaning - drying - lowering parts.
Equipped with automatic separation of water and sand, automatic cleaning, all sand on the workpiece can be cleaned and dried without leaving water drops on the workpiece.
The working mode of the machine: After the workpiece enters the conveying line body, the conveying line brings the workpiece to the sand blasting processing position, and the sand blasting nozzle is reciprocatingly swingable (adjustable speed) to perform sand blasting and cleaning on the surface of the workpiece. After the sand blasting, the workpiece continues to run In the flushing compartment, the flushing water is automatically sprayed and washed to clean the outer surface of the workpiece. The cleaned workpiece enters the next sandblasting cabin for sandblasting and cleaning. It is repeatedly cycled to reach the standard. The air knife cleans the outer surface of the workpiece, and finally the workpiece enters. To the next process.
Sand blasting process
The area to be blasted is cleaned, rinsed and blown into the next process.
1. Turn on the power and turn on the compressed air source;
2. Adjust various parameters;
3. Add an appropriate amount of sand to the sand hopper and close the doors of each equipment;
4. Start the pumping mist fan motor; (high-end models do not need pumping mist)
6. Turn on the automatic processing button;
7. The workpiece automatically enters the blasting area;
8. Automatic blast processing;
9, automatic flushing spray;
10. The air knife blows clean;
The high-end liquid automatic water blasting machine produced by Dongguan Meijun Automation Equipment Co., Ltd. has been used in top mobile phone component manufacturers for the production of glass lenses, ceramic cases, and glass cases for mainstream international high-end mobile phones.