Dongguan Humen Meijun Sandblasting Equipment Store is a professional manufacturer of professional sandblasting machine equipment. The automatic liquid water sandblasting machine for fishing rods can spray 3 meters long fishing rods, surface treatments for carbon fiber fishing rods such as sea rods and throwing rods
Such as matte surface treatment, film removal and wax removal, matte treatment, passivation treatment, matte treatment, strengthened surface, stress treatment, etc.
The automatic liquid water blasting body of the fishing rod is made of 304 stainless steel, a 4kw water blasting pump hybrid power system, ≤0.8kg compressed air, and cooperates with a PLC programmer to control the automatic sandblasting of the fishing rod.
Fishing rod water blasting machine features:
1. Can spray a total length of 3.5 meters.
2. The blasting length and width stroke can be set.
3. The number of sandblasting can be set.
4. Can be sandblasted whole or in sections.
5. The speed of blasting stroke can be adjusted by frequency conversion.
6. The fishing rod can be rotated in the forward and reverse direction, the speed of the rotating blasting can be adjusted, and the blasting pressure can be controlled.
7. Optional 400-2000 # mesh fine powder abrasive for sandblasting.
8.Optional 1-6 sandblasting guns
9. Can use 1-3 fishing rods for sandblasting at the same time
Application of liquid automatic water blasting machine: glass steel, carbon fiber products, jewelry, glasses, stainless steel, surface treatment of clocks, computer cases, mobile phone cases, camera cases, crafts, furniture, glass lenses, carbon ceramic products, steel plates and electronic panel products Surface treatment. (Deburring, surface fogging, matte texture, scratch cleaning, dirt cleaning, rust refurbishment, stripping and wax removal, stress relief)
Water blasting machine, liquid blasting machine, dustless blasting machine, wet blasting machine, automatic water blasting machine, environmental protection blasting machine, water blasting sand blasting machine
Main technical parameters of liquid automatic water blasting machine:
1. Host external dimensions (non-standard can be customized): length 1800-5000mm, width 1500-4000mm, height 1600-2500mm
2. Cabin size: 1000-3500mm long, 800-2000mm wide, 1000-1500mm high
3． Conveying width size: set according to the machine
4． Transmission speed: 150-2000 (mm) inverter adjustment control
5. Number of spray guns: 1-12 (B-type spray gun) nozzle caliber: 6-12mm
6. Sand blasting method: horizontal type
7. Machine noise: ≤65dB
8. Operating temperature range: 0 ° ～ 45 °
9. Bearing capacity: 1-80 (kg)
10． Compressed air source: 4-7.5bar (kg / m2) flow rate: 8-12m3 / min
11. Conveying motor: 380V 750W 50HZ, feeding motor: 7.5kw, stirring motor: 4kw
12. Total power: 12.5KW (excluding air compressor power) Power supply: 380V 50HZ three-phase five-wire system
13. Air compressor power: 22kw50P, plus air tank, this can support 1-6 sand blasting guns