刘伯温精选一码大公开

Welcome to Dongguan Meijun Sandblasting Equipment Store!
Meijun Sandblasting Equipment
Meijun Sandblasting Equipment
Focused on sand blasting machine and sand blasting machine accessories for more than ten years
Pay attention to materials, high quality raw materials, long life
contact details
Meijun Sandblasting Equipment
Product Categories
4Products
水喷砂机环保喷砂设备

Environmental protection sand blasting equipment

Details

Wet blasting machine-water blasting machine-water blasting machine-liquid blasting machine-environmental blasting machine-manual blasting machine

手饰行业,不锈钢制品业,旧件翻新,模具清理, 电子五金类 , 塑料 , 亚克力 , 树脂等工件或工艺品喷砂 Water blasting machine application scope: hand decoration industry, stainless steel products industry, refurbishment of old parts, mold cleaning, electronic hardware , plastic , acrylic , resin and other workpieces or handicrafts .
1) Overall dimensions of the host: 900 * 900 * 1550mm
2) Working cabin size: 680 * 680 * 600
3) Separator motor: 220V / 50HZ / 1500W
4) Cabin material: FRP

水喷砂机,湿式喷砂机,液体喷砂机

水喷砂机 液体喷砂机 环保喷砂机 水喷砂设备

Remarks:
1. The body is made of glass fiber, which is durable and will not corrode.
2. The airbag foot switch control device operates safely and reliably.
3. The blasting effect is obviously different from dry blasting, which is suitable for fine processing.
Application of Liquid Noisy Process
(1) Cleaning the rough surface of precision castings
Liquid spraying is used to clean the dense casting, which can not only remove the oxide scale and residue on the surface of the casting, but also play a polishing role. Improve the surface finish of castings. Especially for complex castings without any heavy volume, liquid jet cleaning and polishing is the most cost-effective process method, such as aircraft engine turbine blades.
Liquid spraying can be used to clean up the die-casting parts, so that the parts can be exposed to the same metal color and make the parts look more beautiful. If liquid shot peening is better, the surface hardness and corrosion resistance of the parts can also be improved. Liquid shot peening can also achieve decoration, such as various instrument shells, frames, etc.
液体 The use of liquid spraying on noisy cast aluminum alloys and copper alloys also results in higher surface quality. For rough parts of rough cast steel and cast iron, liquid spraying is generally not recommended.
(Two) remove the oxide scale
氧化 After heat treatment of oxide scale and residual salt, use liquid spray to clean up and remove oxide scale and improve the smoothness of parts. Especially, the liquid spraying effect on molds and precision parts with complicated shapes is more prominent. For example, the use of liquid spraying after the file heat treatment not only does not damage the cutting edge portion of the file, but also improves the service life of the file.
Various types of metal sheets after hot rolling can also be used to remove oxide scales and stains by liquid spraying to prepare for cold rolling and improve the surface quality of the sheet. 水喷砂机 湿式喷砂机 液体喷砂机
(Three) remove micro-burr of machined parts
Although the burr is very small, with the progress of science and technology, the shape of mechanical parts is becoming more complex, the accuracy requirements are higher and higher, and the application conditions are very strict. No burrs are allowed, such as precision and complex parts for textile machinery parts, hydraulic components, and aerospace industry. , Medical equipment, etc., the use of liquid spray noise to remove burrs is of high quality and high quality, so that a small round corner appears at the junction of the two surfaces. (This is required by many mechanical parts.) If the process parameters can be selected reasonably, the original Some surface luminosity.
(4) Cleaning up dirt and rust stains
Various molds, such as forging molds, stamping molds, tire molds, plastic molds, glass product molds, etc., must be contaminated with mold release agents and other dirt and burn marks after a period of use. Liquid blasting (or shot blasting) is used to clean up the effect It is very significant and can also increase the service life of the mold. The use of liquid spray (pill) on food molds can achieve medical sterilization requirements.
Refurbishing old mechanical parts can achieve the effect of rectifying the old as new. Withstand voltage performance of ceramic components in the electronics industry.
(5) Preparation for other surface treatment processes
Liquid plating is used to treat the parts before plating, and the binding force of the plating layer is strong. This is especially true for hard chromium plating. Such as engine piston ring chromium, spinning machine rollers pear-plated chromium and so on.
Paint parts, spray parts. The use of liquid spray before spraying can increase the bonding force of the coating. Adhesive parts are made of liquid spray and have good quality and firmness. 水喷砂,排气阀,自动排气阀,喷砂机泄压阀
(6) Finishing
Liquid blasting (shot) sand has a very prominent effect as a finishing method. In particular, the polishing of parts with complex shapes such as: impeller engine blades, various mold profiles such as currency molds, and commemorative coin molds is unmatched by any other method. Use liquid spray to polish ceramics and diamonds. It is a very economical method. Such as the polishing of chemical fiber textile machinery friction wheel.
(7) In order to obtain a decorative surface without reflected light
The surface processed with liquid spray or noisy (pellet) is not reflective. For parts that require a smooth surface and do not allow reflection, the use of liquid spray or shot blast is an effective process method. Such as surgical instruments.

Others such as grinding glassware products and pattern designs, instrument panel, plastic drawing paper sand surface processing, mirror surface of single crystal silicon surface, and plush processing of special fabrics, etc., liquid spraying are widely used.

刘伯温精选一码大公开 - About Us - Products - Success Stories - Cooperating Clients - Equipment Video - Company Environment - News Center - Industry News - Message - Recruitment - Contact Us
LOGO
Dongguan Humen Meijun Sandblasting Equipment Store Copyright © Copyright 2017 Technical Support: Dongguan Website Construction [ GMAP ]
Address: Building 1-1, Building A, Qihe Industrial Park, No. 33 Xinxing Road, Xinlian Community, Humen Town, Dongguan City. Tel: 0769-82261696 / Mr. Zhong Visits:
* The relevant webpage materials and related resources on this site are from the Internet. If there is any infringement, please inform us quickly. We will delete it within 24 hours. [ Background Management ]
Main: sand blasting machine, water blasting machine, derusting blasting machine, boron carbide nozzle, blasting machine accessories, blasting gun, mobile phone shell blasting machine, aluminum plate blasting machine, Dongguan blasting machine accessories, environmental protection Sand room, Dongguan sand blasting machine, environmental protection sand blasting room [ Baidu Statistics ]
【粤 ICP 备 09153882 号 -1】 【粤 ICP 备 09153882 号 -2】